How to change solvent:
1. Start Chromeleon by double-clicking the icon below on the desktop
2. Right-click anywhere on Chromeleon to de-select "Monitor Only" and access HPLC functions. There should be no check-mark in front of "Monitor Only".
3. Set Eluent % of the pump to purge to 100%. For example, if pump B is to be purged, set B to 100% and press <return> key.
4. Then click Purge On
5. The Purge On button is green when purge is in progress. It will run at 3 mL/min for 5 min.
No comments:
Post a Comment