1. Back up system
2. Connect Network Card #1 to CBM-20A Lite (with or without Ethernet Switch)
3. Setup a static IP address 10.104.52.20 for Network card #1
4. Install the Shimadzu-HyStar plug-in
5. In HyStar's hardware setup, choose Shimadzu HPLC as the LC System
6. Click LC System Settings
7. Choose CBM-20A Lite as controller, click "configure"
7. Specify IP address of 10.104.52.14 for CBM-20A Lite Connection
8. Configure other devices (except Detector--which should be left blank)
9. Click Save
10. In HyStar hardware setup, click close.
No comments:
Post a Comment